Important Things to Consider
Clean water is essential for a healthy life. Whether you use a water tanker for your home, office, or commercial building, regular cleaning is necessary to maintain water quality and prevent health issues. Over time, dirt, algae, bacteria, and sediments can accumulate inside the tank, contaminating the stored water. In this blog, we will discuss the key things to keep in mind when cleaning a water tanker.
1. Completely Drain the Tank
Before starting the cleaning process, make sure the tanker is completely emptied. Remove all remaining water and sludge settled at the bottom. This sludge often contains dirt, rust particles, and harmful microorganisms, so it must be removed properly.
2. Scrub the Interior Walls
Simply rinsing the tank with water is not enough. Use a hard brush or pressure washer to scrub the inner walls, floor, and corners of the tank. Pay special attention to areas where algae or stains are visible. Proper scrubbing ensures that stubborn dirt and biofilm are removed.
3. Disinfect the Tank
After physical cleaning, disinfection is a crucial step. A chlorine or bleach solution is commonly used to kill bacteria, viruses, and other pathogens.
-
Use a suitable amount of household bleach mixed with water (the exact amount depends on the tank size).
-
Let the disinfectant solution sit inside the tank for at least 2–3 hours.
-
Ensure that all internal surfaces come into contact with the solution.
This step ensures the elimination of harmful germs.
4. Rinse Thoroughly
Once the disinfection process is complete, rinse the tank thoroughly with clean water at least once or twice. This helps remove any chemical residue and ensures the water stored afterward is safe for use.
5. Inspect the Lid and Pipes
After cleaning, check the tanker’s lid to make sure it closes tightly. A loose lid can allow dust, insects, and debris to enter. Inspect inlet and outlet pipes for leaks or cracks. Make sure the ventilation opening has a mesh screen to prevent pests from entering.
6. Maintain a Cleaning Schedule
Regular maintenance is key to safe water storage. Ideally, water tanks should be cleaned every 3 to 6 months. However, if you notice a bad smell, discoloration, or unusual taste in the water, arrange cleaning immediately.
7. Follow Safety Precautions
Safety should always come first during the cleaning process:
-
Wear gloves, masks, and protective clothing.
-
Ensure proper ventilation, especially for underground tanks.
-
Avoid mixing cleaning chemicals.
-
Keep children away from the cleaning area.
Cleaning a water tanker is not just about removing visible dirt—it is about ensuring safe and healthy water for daily use. Regular cleaning, proper disinfection, and routine inspection can prevent contamination and protect your family’s health. By following the steps mentioned above, you can maintain clean and safe water storage throughout the year.
